Install oil pump

• Turn in oil pump (1) upward, guide in, and position.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) to (7).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Oil pump
  M6x20 screw	Tightening torque	8.4 Nm
  M6x50 screw	Tightening torque	8.4 Nm
  M6x100	Tightening torque	8.4 Nm

  Fig 1: Oil Pump Screws Tightening Sequence

  Courtesy of BMW OF NORTH AMERICA, INC.
• Guide in chain guard (2) and position.
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Oil pump
  M6x20 screw	Tightening torque	8.4 Nm
  M6x50 screw	Tightening torque	8.4 Nm
  M6x100	Tightening torque	8.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Coat O-ring (1) with motor oil.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position intake pipe (2).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Oil pump
  M6x20 screw	Tightening torque	8.4 Nm
  M6x50 screw	Tightening torque	8.4 Nm
  M6x100	Tightening torque	8.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LOWER OIL PAN SECTION .
• Refer to TIGHTENING THE OIL DRAIN PLUG .
• Refer to REMOVING THE OIL FILLER CAP .
• Refer to FILLING ENGINE OIL .
• Refer to INSTALLING THE OIL FILLER CAP .
• Refer to CHECKING ENGINE OIL LEVEL .
• Refer to INSTALLING THE STIFFENING PLATE .