Preparing the rear window

Clean the windshield in the area of the adhesive bead (1).
CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324

After cleaning, allow to air out.

TECHNICAL DATA SPECIFICATION

Air drying time after cleaning
Window glass or painted panel without residual adhesive bead	5 min
Body with adhesive bead	15 min

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Do not touch the adhesive bead after cutting or allow it to come into contact with cleaning agents.

Apply the pinchweld scraper as shown and cut back the adhesive bead (1).

TECHNICAL DATA SPECIFICATION

Residual height of the adhesive bead
Residual height of the adhesive bead	max. 1 mm