Installing the oil pressure switch

• Replace sealing ring (1).

  Parts:  Sealing ring

• Position the oil pressure switch (2) with the sealing ring (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten oil pressure switch (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Oil pressure switch
  Joining torque	15 Nm
  Angle of rotation	16°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the heat shield (2).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  heat shield
  M6x16 screw	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE STIFFENING PLATE .