Install the transmission bearing support

• Version 1: 
• Install transmission bearing support holder (3).
• Tighten screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Transmission bearing support to body
  M8	Tightening torque  19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the vibration absorber (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rubber mount to transmission bearing support
  M8	Tightening torque  19 Nm

• Version 2: 
• Install transmission bearing support holder (3).
• Tighten screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Transmission bearing support to body
  M8	Tightening torque  19 Nm

• Tighten nut (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rubber mount to transmission bearing support
  M8	Tightening torque  19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the retaining plate (2).
• Tighten nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING UNDERBODY PROTECTION AT REAR .