Installing the rear ride height sensor

• Position ride height sensor (2).
• Replace screws (1).

  Parts  : screw

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Ride height sensor to holder
  M5 Replace screw.	Tightening torque	4.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the clip (2) of the attachment rod to the ride height sensor.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVER OF THE CAMBER CONTROL ARM .
• Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .
• Refer to RESETTING THE TIRE PRESSURE MONITOR .
• Refer to ADJUSTING HEADLIGHTS .