Installing the safety pressure switch

• Correctly position the safety pressure switch (2) and tighten with the special tool 0 491 167 (12 7 110).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Safety pressure switch
  tightening torque	10 Nm

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE BRACKET FOR THE DME CONTROL UNIT .
• Refer to INSTALLING THE ENGINE CONTROL UNIT COVER .
• Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
• Refer to EVACUATE AND CHARGE CONDITIONING .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .