Installing the right-hand engine ventilation line and the crankcase ventilation intake pipe

• Check the sealing rings (1) of the engine ventilation line (2) for correct placement and for damage, and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the engine ventilation line (3) on the cylinder head cover.
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Engine ventilation line
  screw	Tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the engine ventilation line (3) to the clean air pipe and lock the lock (2).
• Replace the intake pipe (1) of crankcase ventilation.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the intake pipe of the crankcase ventilation (1) to the right cylinder head cover and audibly lock.

Courtesy of BMW OF NORTH AMERICA, INC.