Removing the engine from the assembly jig

CAUTION: Heavy component  .
Heavy components can lead to injury or damage  .

• Remove and install heavy components with the aid of another person/other persons.

• Stage the workshop crane 2 220 718  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Prepare the special tool (lifting equipment) 0 490 567 (11 0 020)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  The workshop crane, lifting gear and the mounting brackets on the engine must all be connected to each other so that the engine hangs straight upon lifting.
• Connect both hooks of the special tool 0 490 567 (11 0 020) to the front and rear of the engine with the mounting brackets.
• Connect the workshop crane 2 220 718  to the special tool (lifting equipment) 0 490 567 (11 0 020)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slacken nuts (1).
• Unclamp the clamp jaws of the special tool (motor mount) 2 413 082 in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Raise the engine slowly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unscrew the screws (marks) and remove the special tool 2 411 718 .

Courtesy of BMW OF NORTH AMERICA, INC.