Connect the refrigerant line to the expansion valve

• Replace O-rings.

  Parts:  O-rings

• Correctly position the refrigerant line (2).
• Tighten the nut (1).

TIGHTENING TORQUE SPECIFICATIONS

Refrigerant line to expansion valve/connecting piece
M6	tightening torque	13 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Close the holder (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

• Insert the refrigerant line in holder (1).

• Close the holder (1).

Courtesy of BMW OF NORTH AMERICA, INC.