Check the vent holes of the battery
WARNING:
Exhaust
.
Injury hazard! Danger of explosion!
Injury hazard! Danger of explosion!
- Assign the vent holes correctly.
- Route the vent hose correctly.
NOTE:
TECHNICAL INFORMATION
The battery has two ventilation openings positioned opposite to each other:
One ventilation opening (1) must be closed correctly with a dummy plug.
The vent hose (3) must be correctly connected and routed at the other ventilation opening (2).
The battery has two ventilation openings positioned opposite to each other:
One ventilation opening (1) must be closed correctly with a dummy plug.
The vent hose (3) must be correctly connected and routed at the other ventilation opening (2).
Check
- Check if the ventilation opening (1) is correctly closed with a dummy plug.
Result
» No dummy plug.
Measure
- Close the vent hole (1) correctly with a dummy plug.
Check
- Check whether the vent hose (3) is correctly connected to the ventilation opening (2).
Result
» The vent hose (3) is not correctly connected.
Measure
- Connect the vent hose (3) correctly to the ventilation opening (2).
Check
- Check if the vent hose (3) is laid with a slope towards the outside (no siphon formation).
Result
» The vent hose (3) is not routed correctly as shown on the right side.
Measure
- Route the vent hose (3) correctly as shown in the center.