Secure the wishbone on the top left and right on the swivel bearing

Fastening the wishbone to the top of the swivel bearing 

• Position journal of upper wishbone (3) in bore of swivel bearing (4).
• Replace screw (2) and the nut (1).

  Parts:  Bolt and nut

• Insert screw (2).
• Tighten the nut (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Upper wishbone to swivel bearing
  M10 Replace screw and nut.	Tightening torque	56 Nm

• Remove the special tool for attaching the swivel bearing.

Courtesy of BMW OF NORTH AMERICA, INC.