Fit steering column shroud upper section

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the right and left side.

Clip in the steering column shroud upper section (1) into the guide (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Press the upper section of the steering column shroud (1) downwards in arrow direction.
The upper section of the steering column shroud must engage audibly and perceptibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Seal the bore using rubber plugs (1).

Courtesy of BMW OF NORTH AMERICA, INC.