Shifting vehicle into normal position

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Only on vehicles with air spring system: Perform ride height adjustment with diagnostic system.
Check vehicle interior and trunk (including luggage compartment well) for load status, if applicable, unload vehicle.

Lay prescribed DIN load into the vehicle.

TECHNICAL DATA SPECIFICATION

DIN normal position loading
	Vehicle has a full tank. Vehicle is completely assembled.
	Per front seat (seat in center position)	68 kg
	On the center rear seat	68 kg
	Centered in the trunk	21 kg

Only on vehicles with air spring system: After the vehicle has been loaded, start the engine and wait until the vehicle ride height has been adjusted.
NOTE: (The doors must be closed)