Installing the trims on the operating facility in the center console

• Disengage and replace the (1) swivel.

  Parts:  Spherical cap

• Position the ribbon cable (2) correctly through the swivel (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the trim (1) in the marked area.
• Clip in the trim (1) in the direction of the arrow.

  The trim (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the trim (1) for the parking brake button and lock in place in the arrow direction.

  The trim (1) must lock in place audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SELECTOR LEVER .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .