Installing the positive battery cable power distribution at the rear

• Connect and lock all connectors (1) to the power distribution of the positive battery cable (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position power distribution of positive battery cable (2).
• Tighten nut (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Power distribution box
  Nut	tightening torque	8.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the associated positive battery cable and tighten with the nuts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Positive battery cable
  Positive pole screw	tightening torque	15 Nm

• Close the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (WITHOUT 3RD SEAT ROW) .
• Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING (ELECTRICAL ROLLER COVER FOR LUGGAGE COMPARTMENT) .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .