Placing brake pads on brake disc/commissioning

NOTE: TECHNICAL INFORMATION
After a brake pad exchange and before pressing the brake pedal: It is imperative to apply the electromechanical parking brake.
If this is not observed, a CC message appears and the brake system switches to the emergency program. The brake booster is no longer active.

Operate/engage electromechanical parking brake (1).

G14362919

Courtesy of BMW OF NORTH AMERICA, INC.

Depress the brake pedal (1) several times so that the brake pads are in contact with the brake disks.

G14362920

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE REAR BRAKE PAD WEAR SENSOR .
Refer to INSTALLING THE REAR LEFT AND RIGHT WHEEL .
Refer to START-UP OR BEDDING IN BREAK-IN OF NEW BRAKE PADS AND BLADES (REAR BRAKE) .