Install front brake hose

• Attach brake hose to the holder (1).

  Observe installation sequence:

  • Secure brake hose in the holders.
  • Move wheels into straight-ahead position.
  • Screw brake hose onto the connection between pipe and brake hose.
  • Screw brake hose on brake caliper.

• Position and tighten the union screw (2). If necessary, use the square end (3) for counter support.

Courtesy of BMW OF NORTH AMERICA, INC.

• Position and tighten the brake hose (1) on the brake caliper and use the knurling (2) for counter support as needed.

Courtesy of BMW OF NORTH AMERICA, INC.

• Attach brake hose to the holder (3).

Follow-up work 

• Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
• Refer to CONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
• Refer to FLUSHING AND BLEEDING FRONT BRAKES (AFTER PART EXCHANGE) .
• Refer to DISCONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .