Installing the trunk lid seal

• Remove sealant residue from the sheet metal flange.
• Clean the sheet metal flange with solvent cleaner R2.

• Replace the trunk lid seal (1).

  Parts:  Trunk lid seal

• Mount the trunk lid seal (1) starting from the top middle.
• Make sure that the seal for the for the trunk lid (1) is positioned correctly against adjacent trim panel components.

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check the closing function of the trunk lid.

Result 

» The trunk lid does not close correctly.

Measure

• Make sure that the seal for the for the trunk lid (1) is positioned correctly against adjacent trim panel components.