Installing the luggage compartment trim panel on the right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing trim panel of luggage compartment
- Feed in and correctly position trim panel of luggage compartment (2).
- Tighten the screws (1) and nuts (2).
TIGHTENING TORQUE SPECIFICATIONS
| Luggage compartment trim panel to body | ||
|---|---|---|
| Oval-head screw M5x16 |
Tightening torque | 3.0 Nm |
| hexagon screw M4.8x19 |
Tightening torque | 3.0 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
Follow-up work
- Refer to INSTALLING THE RIGHT D-PILLAR TRIM PANEL .
- Refer to INSTALLING THE RIGHT C-PILLAR TRIM PANEL .
- Refer to INSTALL RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (ALL EQUIPMENT VERSIONS) .
- Refer to INSTALLING THE RIGHT BOTTOM C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE RIGHT BOTTOM C-PILLAR TRIM PANEL (3RD ROW OF SEATS) .
- Refer to INSTALLING RIGHT BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR DOOR SILL COVER STRIP (ELECTRICAL REAR SEAT) .
- Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
- Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALL LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING ROLLER COVER FOR LUGGAGE COMPARTMENT .