Removing The Connection Between Engine Mount And Side Frame

Carry out a separating cut (1) as shown on the joint plate (2) of the engine mount.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the welded connections in the areas (2) and remove the joint plate (1). Release the welded connections using the file belt sander.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen welded connections in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the welded connections in the areas (1) and the outer connecting plate.

Courtesy of BMW OF NORTH AMERICA, INC.
Release welded connections in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the welded connections in the areas (1) and remove the inner connecting plate.

Courtesy of BMW OF NORTH AMERICA, INC.