Installing The Left Luggage Compartment Floor

• Join new parts and weld in area (1)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.
  CONSUMABLE SPECIFICATIONS
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean bonding surfaces on vehicle and on new part with cleaning agent R1.
  CONSUMABLE SPECIFICATIONS
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K5 to bonding surfaces.
  ADHESIVE SPECIFICATIONS
  
  

  Body adhesive K5

  50 ml

  83192158654

• Install new parts and rivet in areas (1) to (4) with blind rivets N3 and N6.

  Place blind rivets from outside to inside.

  Area	Description	Number
  1	N3	6
  2	N3	3
  3	N6	2
  4	N3	3

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N3	83190301421
  Ø 4 mm; clamping area 1-3 mm

  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N6	83192158655
  Ø 4 mm; clamping area 3-5 mm

• Rivet the new parts in the area (1) with blind rivets N3.
  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N3	83190301421
  Ø 4 mm; clamping area 1-3 mm

• Weld the new part in the area (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the EMC screw 

• Drill the hole with a diameter of 4.2 mm after the adhesive completely hardens.
• Screw in the EMC screw.
• Seal the EMC screw with the sealant.
  CONSUMABLE SPECIFICATIONS
  
  

  Sealant D1 (seam sealing)

  310 ml

  83422409985

• After the adhesive has hardened (1) install 2 EMC screws in the areas.
  CONSUMABLE SPECIFICATIONS
  
  

  screw	83190301639
  EMC screw, SF Plus, M5x15

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work