Remove The Door Sill At The Front Door

Further information is available.

• Mark and perform the separating cuts (1) and (2) according to the specified dimensions. Thereby disconnect only the outer panel.

  Dimension (a) = 85 mm from the center of the hole with 0 20 mm.

  Dimension (b) = 60 mm from the center of the hole with 0 20 mm.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen welded connections in areas (1).
  NOTE: TECHNICAL INFORMATION 
  For additional information see 4100... OPENING BONDED CONNECTIONS (ALL X5 MODELS, 2019-2022) .
• Open spot-welded adhesive joints in areas (2).
• Release the section of the door sill from the cavity sealing (3) and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.