Supplying The New Parts Required
Prerequisite
- Vehicle is secured on the straightening bench.
WARNING:
DANGER
High-voltage system .
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
High-voltage system .
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
- All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
- For additional information see:
61 00... Safety instructions on handling hybrid cars
- For additional information see:
61 25... Notes on repair of high-voltage battery unit
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see 4100... REPAIR TECHNIQUES, REPAIR STAGE 3 (ALL X5 MODELS, 2019-2022) .
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
- Refer to REMOVE FLAP IN LUGGAGE COMPARTMENT TRIM PANEL ON RIGHT .
- Refer to DE-ENERGIZE THE HIGH-VOLTAGE SYSTEM .
- Refer to CHECK THAT NO VOLTAGE IS APPLIED .
Further information is available.
- Prepare the following new parts (see applicable BMW Parts Catalog [EPC]):
Front spring support (1)
Front engine mount (2)
Carrier support, wheel arch, front (3)
Carrier support extension (4)
Inner engine mount connection (5)
Connector box holder (6)
Support bracket shaped part
NOTE: TECHNICAL INFORMATION
For additional information see 4100... OVERVIEW OF CONSUMABLES (ELECTRONIC PARTS CATALOG) (ALL X5 MODELS, 2019-2022) . - Supply the following consumables:
Material Quantity Adhesive K1 1 Blind rivet N1 50 Blind rivet N2 35 Blind rivet N7 5 Punch rivet N5 50 EMC screw 6 Cleaning agent R1 1 Cleaning agent R2 1 Sealing compound D1 1 Cavity protection wax remover 1