Installing the drive for the backrest angle adjustment

• Position the drivetrain for backrest tilt adjustment (3) correctly.
• Feed the drive linkage (1) correctly into the drivetrain for backrest tilt adjustment (3).
• Connect connectors (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION .
• Refer to TIGHTENING END FITTING .
• Refer to INSTALLING THE SEAT COVER WITH CUSHION AT LEFT .
• Refer to INSTALLING INSIDE COVER ON REAR SEAT .
• Refer to INSTALLING THE OUTER COVER ON THE REAR SEAT .
• Refer to INSTALLING REAR PANEL OF THE REAR SEAT BACKREST, LEFT .
• Refer to INSTALLING THE COVERS OF THE SEAT ADJUSTMENT SWITCHES .
• Refer to INSTALLING THE GUIDE SLEEVE FOR THE REAR HEAD RESTRAINT .
• Refer to INSTALLING THE HEAD RESTRAINT .
• Refer to INSTALLING THE LEFT HAND SEAT .