Installing transmission cross member

• Install the transmission cross member (2)  .
• Replace screws (1)  .

  Parts:  Screws

• Tighten down screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Transmission cross member to body
  M8	tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the line.
• Fasten the line with clamps (1)  at the transmission cross member (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the luggage strap (1)  from the transmission.
• Remove the special tools  2 219 012  and  0 495 498 (23 4 050)  . 

Courtesy of BMW OF NORTH AMERICA, INC.