Installing left and right C-pillar trim panels at the bottom

Install the bottom C-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

Feed in C-pillar trim panel (2) in the door sill cover strip and position correctly.
Clip in C-pillar trim panel (2) at the clips (3) .

Tighten down screw (1) .

TIGHTENING TORQUES SPECIFICATION

C-pillar trim panel at the bottom of the body
Screw 4.8x16	Tightening torque	1.4 Nm

Courtesy of BMW OF NORTH AMERICA, INC.