Installing the actuator on the hood hinge

• Insert the actuator (3) into the rear guide pin and push it toward the rear up to the stop.
• Replace the screw (2).

  Parts:  Screw

• Tighten down screw (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Actuator to engine compartment lid hinge
  M6x10 Replace screw.	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

Follow-up work 

• Refer to RECONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .