Remounting the adapter for the trim of the instrument cluster
- Release (1) clips.
- Remove the adapter (2)
for the trim from the instrument cluster (3)
.
- Installing the adapter for the trim of the instrument cluster
Check
- Check the trim detailings (1)
and the guides on the adapter (2)
for the trim for damage.
Result
» The trim detailings (1) or the guides are damaged.
Measure
- Replace the adapter (2)
for the trim.
Parts: Adapter
- Position the adapter (2)
for the trim on the instrument cluster (3)
and clip it in.
The trim detailings (1) must snap-in audibly.