5111 Bumper, Front
5111 TIGHTENING TORQUE OVERVIEW
| Air duct to bumper cover | ||
| screw | tightening torque | 3 Nm |
| Front bumper cover on side wall | ||
| Hexagon screw | tightening torque | 3 Nm |
| Bumper cover, top | ||
| M6x20 | tightening torque | 4.6 Nm |
| Bumper trim panel lower part | ||
| screw | tightening torque | 3 Nm |
| Support/Deformation element to vertical connection | ||
| M6x20 screw | tightening torque | 11.8 Nm |
| Support/Deformation element, bottom to front subframe adapter | ||
| M8x60 screw | tightening torque | 19 Nm |
| Adapter, front axle support to front axle support | ||
| M8x80 | tightening torque | 19 Nm |
| License plate baseplate | ||
| Oval-head screw | tightening torque | 2.5 Nm |
| Front bumper bracket to engine mount | ||
| Hexagon screw with flange Replace screw |
tightening torque | 100 Nm |
| Angle of rotation | 180° | |
| Bumper bracket, side front | ||
| screw | tightening torque | 3 Nm |
| Cross-member on crash reinforcement | ||
| Screw | tightening torque | 19 Nm |