Installing the cover on rear bumper cover

Position the cover (1) and engage at the detents (2) along the dotted line.

G15991015

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The description is provided only at one component. The procedure is the same for all other components.

Install the ultrasonic sensor (2) and engage at the detents (1) .

G14195149

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE REAR BUMPER COVER .
Refer to INSTALLING THE TRIM IN THE WATER CHANNEL ON THE LEFT AND RIGHT .
Refer to INSTALLING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANEL .
Refer to INSTALLING BOTH BOTTOM D-PILLAR TRIM PANELS .
Refer to INSTALLING THE LEFT AND RIGHT FLAP IN THE LUGGAGE COMPARTMENT TRIM PANEL .