Install left and right wiper arm
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install left and right wiper arm
NOTE:
TECHNICAL INFORMATION
The wiper system must be in the zero position.
After installing the cowl cover and before installing the wiper arms:
Operate wiper system 1x to ensure wiper system is in the correct installation position.
The wiper system must be in the zero position.
After installing the cowl cover and before installing the wiper arms:
Operate wiper system 1x to ensure wiper system is in the correct installation position.
- Insert the wiper arms (3) .
- Correctly position the wiper arm (2)
in relation to the window edge (1)
.TECHNICAL DATA SPECIFICATION
Distance from window pane edge to wiper blade Wiper arm right (A) 59 mm Wiper arm left (B) 60 mm NOTE: Description is for left component only. Procedure on the right side is identical. - Tighten nut (2)
.TIGHTENING TORQUE SPECIFICATION
Windshield wiper arm Combination hexagon nut tightening torque 35 Nm - Connect the protective cap (1)
.