Installing the rear center console trim

Check the clips (1).
Replace broken or missing clips (1).
Check guides (2).
If the guides (2) are faulty, replace the rear center console trim.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach center console trim (2).
Secure the wiring harness to the rear center console trim (2) and connect the connectors.
Position center console trim (2) correctly at the back and clip in on the clamps (3).
Replace nuts (1).
Parts: Nuts
Tighten nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATION

Rear center console trim on body
Nuts Replace nuts	tightening torque	4.6 Nm

Installing the rear seat

Guide in seat belt buckles (3), position rear seat (1) and clip it into clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.