Installing the trim on the upper windshield panel
- Position the trim (2) in the area (3) and clip it in.
- Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATION
| Windshield panel trim to windshield frame | ||
|---|---|---|
| Screw | tightening torque | 2.5 Nm |
Follow-up work
- Refer to INSTALLING FRONT VANITY MIRROR LIGHT .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE LEFT AND RIGHT A-PILLAR TRIM PANEL .
- Refer to INSTALLING BOTH SUN VISORS AND COUNTER SUPPORTS .