Supplying The New Parts Required
Precondition
- Vehicle is fixed on straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For the stripping and rebuilding operations, refer to the surrounding text in Aftersales Information Research. See the FRU number.
Preliminary work
Follow-up work
- Prepare the following new parts (see Electronic Parts Catalog [EPC]):
Side frame, center (1)
Shaped part of front outer door sill (2)
Reinforcement, shaped part, side (3)
Shaped part, door sill, rear outer (4)
Shaped part of bottom B-pillar (5)
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Overview of consumables in Electronic
Parts Catalog - Supply the following consumables:
| Material | Quantity |
|---|---|
| Cleaning agent R1 | 1 |
| Sealant D1 | 1 |
| Cavity sealing wax remover |