Removing The Connection Between The Engine Mount And The Side Frame

• Release welded connections in areas (1)  . Release some of the welded connections using a belt sander.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release welded connections in areas (1)  .
• Mark and make the separating cut (2)  as shown. Carry out part of the separating cut using a belt sander.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release welded connections in areas (1)  and remove component (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark and make the separating cut (1)  as shown.
• Release welded connections in areas (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark and make the separating cut (1)  as shown.
• Release welded connections in areas (2)  and remove component (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release welded connections in areas (1)  and remove component (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.