Supplying The New Parts Required
Precondition
- Vehicle is secured on the straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For the stripping and rebuilding operations, refer to the surrounding text in Aftersales Information Research. See the FRU number.
Preliminary work
- Prepare the following new parts (see Electronic Parts Catalog [EPC]):
Front wheel arch (1)
Carrier support, wheel arch, front (2)
Engine mount reinforcement (3)
Support bracket shaped part
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Overview of consumables in Electronic
Parts Catalog - Supply the following consumables:
| Material | Quantity |
|---|---|
| Adhesive K1 | 1 |
| Blind rivet N1 | 65 |
| Blind rivet N2 | 2 |
| Blind rivet N3 | 3 |
| Blind rivet N6 | 1 |
| EMC screw | 3 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| Sealing compound D1 | |
| Cavity protection wax remover |