Installing the cover on the inside of the window frame

• Start from the rear and connect the cover (1) to the door frame.
• Clip in cover (1) into clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly insert the cover on the window frame (1) into the gap of the rubber window seal (2).
• Make sure the cover (1) is correctly positioned on the door weather strip.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT INNER WINDOW CHANNEL STRIP .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE MIRROR TRIANGLE COVER .
• Refer to ATTACHING THE COVER TO THE DOOR HANDLE .