Installing the rear ventilation grille

Check whether all clamps (1) are present and correctly seated. Replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach ventilation grille.
Connect, lock and install the connector (1) in the holder.
If necessary, connect and lock any additional connectors.
Ensure correct cable routing.

Courtesy of BMW OF NORTH AMERICA, INC.
Carefully insert the ventilation grille (1) in the center console starting in the upper area and engage it at the detents (2) in the lower area.

Courtesy of BMW OF NORTH AMERICA, INC.
Install the trim (1) and clip it in at the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.