Install oil pump

• Turn in oil pump (1) upward, guide in, and position.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) to (7).

Fig 1: Oil Pump Screws Tightening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in chain guard (2) and position.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Coat O-ring (1) with motor oil.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position intake pipe (2).
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LOWER OIL PAN SECTION .
• Refer to TOPPING UP MOTOR OIL .
• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to INSTALLING FRONT UNDERBODY PROTECTION .