Install the cup holder

• Connect associated connector.
• Clip in the cup holder (1) from the top.
• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Cupholder

  1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the insert (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to FASTENING THE CENTER CONSOLE TRIM ON THE CENTER CONSOLE .
• Refer to INSTALLING THE CENTER ARMREST .
• Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .