Remove rear seat backrest
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Loosen screws (1).
- Detach the rear seat backrest (2) upwards out of the guides (3).
- Feed out and remove the rear seat backrest (2) from the safety belt.
- Insert the rear seat backrest (2) and place the seat belt around the rear seat backrest (2) .
- Hook the rear seat backrest (2) into the guides (3) from above.
- Replace screws (1)
.
Parts: Screws
- Tighten down screws (1) .
TIGHTENING TORQUES SPECIFICATION
| Rear seat backrest on body | ||
|---|---|---|
| Screw Replace screw. |
Tightening torque | 42 Nm |
Follow-up work
- Refer to INSTALLING THE REAR SEAT BENCH .