Installing the servomotor

• Make sure that the cam (1) of the servomotor is positioned without distortion in the recess.

Courtesy of BMW OF NORTH AMERICA, INC.

• Position servomotor (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the cable on holders (3).
• Connect connectors (1) and (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SERVOMOTOR DUE TO OIL LEAK: CHECKING THE OIL LEVEL IN THE REAR AXLE DIFFERENTIAL .
• Refer to REPLACING (BEVEL GEARS OR SERVOMOTOR): CARRYING OUT THE "DELETE WEAR DATA" SERVICE FUNCTION .