Replacing the left and right radial shaft seal

NOTE: Perform the steps on the right and left side.

Replace radial shaft seal.

Prepare the special tool 0 490 466 (00 5 010) with the special tools 0 494 649 (21 2 230) (without the screw) and 0 493 384 (11 1 212) .

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out and remove the radial shaft seal (1) with the special tools 0 490 466 (00 5 010), 0 494 649 (21 2 230), and 0 493 384 (11 1 212).
Replace radial shaft seal (1) .
Parts: Radial shaft seal

Courtesy of BMW OF NORTH AMERICA, INC.

Coat the housing of the sheet metal flange of the radial shaft seal with approved rear differential fluid.
Strike in the radial shaft seal with the matching special tool 0 495 860 (33 5 130) or 0 495 862
(33 5 140) up to the stop.
Remove special tool.

Courtesy of BMW OF NORTH AMERICA, INC.