Installing the VDP control unit
- Connect and lock the connector (1) on the VDP control unit.
- Tighten the nuts (2).
TIGHTENING TORQUE SPECIFICATIONS
| VDP control unit to body | ||
| Plastic nut Replace plastic nut. | tightening torque | 2.6 Nm |
- Fold back the carpet in the footwell (1).
Follow-up work
- Refer to INSTALLING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
- Refer to CONNECTING ALL BATTERY GROUND LEADS . .
- Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .