Remove front brake disc

NOTE: TECHNICAL INFORMATION
Different variants maybe installed depending on the vehicle equipment.

NOTE: RISK OF DAMAGE
Failure to comply with the specification.
Component damage.

All specifications must be observed and complied with.

Loosen screws (1) .
Remove the brake disk (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Variants with carbon ceramic brake:
Screw in two screws (M8) into the internal thread (1) on the brake disc chamber.

Press the carbon-ceramic brake disc of the wheel hub shut.

Screw in screws evenly to avoid distortion of the brake disc chamber during removal.

Courtesy of BMW OF NORTH AMERICA, INC.