Tightening the screw connections to the wheel carrier

• Slacken the nut (1)  by a turn and tighten it. In doing so, counter support at the eccentric screw (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Camber control arm to wheel carrier
  M14 Replace eccentric screw, eccentric washer and nut.	Tightening torque	165 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slacken the nut (1)  by a turn and tighten it. In doing so, counter support at the eccentric screw (2)  .

TIGHTENING TORQUE SPECIFICATIONS

Lower rear wishbone to wheel carrier
M12 Replace eccentric screw, eccentric washer and nut.	Tightening torque	100 Nm

Courtesy of BMW OF NORTH AMERICA, INC.