Tightening the screw connection to the shock absorber and the wheel carrier

• Slacken the nut (1)  by a turn and tighten it. Provide counter support to screw (2)  in the process.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rear shock absorber to the camber control arm
  M12 Replace screw and nut. Tighten in the NORMAL POSITION . Tightening via nut.	Tightening torque	100 Nm
  	Angle of rotation	90°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slacken screw (1)  by a turn and tighten it.

TIGHTENING TORQUE SPECIFICATIONS

Front lower wishbone to wheel carrier
M12 Replace screw. Tighten in NORMAL POSITION .	Tightening torque	100 Nm

Courtesy of BMW OF NORTH AMERICA, INC.