Releasing the left and right output shafts from the rear axle differential
NOTE:
Perform the steps on the right and left side.
Releasing the output shaft on rear axle differential
Precondition
The exhaust system was removed.
- Prepare special tools 0 495 851 (33 5 120) and 0 496 765 (33 5 126) .
- Position special tool 0 496 765 (33 5 126)
on the circumferential slot (1)
of the output shaft.NOTE: RISK OF DAMAGE
Failure to comply with the specification.
Component damage.- All specifications must be observed and complied with.
- Support the special tool 0 495 851 (33 5 120) without fail in the area (1) on the rear axle differential.
- Press out the output shaft from the rear axle differential using special tool 0 495 851 (33 5 120) with jerky movements.