Releasing the bottom wishbone and the camber control arm from the wheel carrier

Precondition 

The coil spring is tensioned.

• Mark the position of the eccentric of eccentric screw (3)  in relation to the wheel carrier in order to simplify the subsequent adjustment of the rear axle.
• Release nut (1)  .
• Remove the eccentric washer (2)  .
• Pull out eccentric screw (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1)  .
• Release the bottom front wishbone (2)  from the wheel carrier.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark the position of the eccentric of eccentric screw (1)  in relation to the camber control arm in order to simplify the subsequent adjustment of the rear axle.
• Release nut (2)  and remove the eccentric washer.
• Pull out eccentric screw (1)  .
• Release nut (3)  .
• Pull out screw (4)  .

Courtesy of BMW OF NORTH AMERICA, INC.