Fastening the anti-roll bar link to the anti-roll bar

• Position the anti-roll bar link (4)  on the anti-roll bar.
• Protect the shock absorber from damage with a cloth (1)  .
• Replace nut (2)  .

  Parts:  Nut

• Tighten nut (2)  . Counter support with a wrench (3)  with Torx socket.

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Rear anti-roll bar link on anti-roll bar
M10 Replace nut.	Tightening torque	56 Nm